Basic Info.
Usage
Environmental Protection, Chemical Industry
Performance
Efficient Filtration
Material
Stainless Steel 304
Transport Package
Wooden Case
Specification
ISO9001: 2000
Product Description
Hot Sale Water Treatment Machine (SWT-1)
Water feeding pump
Requested access to the system's raw water has a stable flow and pressure, its purpose is to prevent water fluctuations have an impact on the system operation to ensure the stability of the system into the water. After the original pumps pressurized raw water sent to the system.
First stage pretreatment.(Sand filter)
The use of multi-medium quartz sand filters, main purpose is to remove the water contains sediment, manganese, rust, colloid material, mechanical impurities, suspended solids and other particles in the above 20UM of substances hazardous to health. The effluent turbidity is less than 0.5NTU, CODMN less than 1.5mg / L, iron content of less than 0.05mg / L, SDI less than or equal to 5. Water filter is a kind of "physical - chemical" process, the water through granular materials when isolated filter water impurities and colloidal suspensions. Filter is an effective water purification and treatment of the main process in the preparation of pure water is an indispensable process.
The main structure: barrel body, baffles, manhole, gauge, filter head, filter, into the water pipes, drains and flushing water mains, as well as access to water, such as the composition of backwashing valve.
Media placement: the placement of single-layer media, there are 0.5 --- 0.53mm particle size of quartz sand composition, thickness 600-700mm, the normal flow rate of particle size 0.5 --- 0.6mm ,10-15M / H, particle size 0.5 --- 1.2mm, 8-10M / H .
Backwashing strength as the 10-15L / (m * S), expansion rate of 50%, washing lasted 10 min. Working pressure : 0.2 --- 0 .6 Mpa, temperature :5 - 60 ºC.
Second stage pretreatment (Carbon filter)
Activated carbon filters used to remove the pigment in the water, smell, a large number of chemical and biological organisms, reducing the residual value of water and pesticide pollution and other harmful pollutants. The structure of activated carbon filters and quartz sand filters, the difference is placed inside the strong adsorption capacity of activated carbon for removal by the quartz sand filter without the filter out organic material, adsorption of residual chlorine in the water, using water more than less than or equal to chlorine 0.1ML/M3, SDI less than or equal to 4, are strong oxidants chlorine, there are various types of membrane damage, in particular, reverse osmosis membranes are more sensitive to chlorine. In addition, the activation process, the surface of activated carbon to form non-crystalline parts of some oxygen-containing functional groups, these functional groups can have a chemical adsorption of activated carbon catalytic oxidation of bad news, to restore the performance, can effectively remove a number of metal ions in water.
Pure water in the manufacturing process, activated carbon adsorption performance in four areas: reducing the oxidation of water requirements; to avoid entering the organic matter, pollution ion-exchange membrane and reverse osmosis membrane; reduce the residual chlorine in the water to protect the reverse osmosis membrane; remove water three halides, such as to improve the overall quality of water.
The main structure: barrel body, baffles, manhole, gauge, filter head, filter, into the water pipes, drains and flushing water mains, as well as access to water, such as the composition of backwashing valve.
Media placement: the placement of single-layer media, 0.2 --- 0.3m loaded at the bottom of the quartz sand filter layer of quartz sand in the upper 1-1.5m thick loaded activated carbon, and adsorption filters, flow rate is 6 -- 10M / H, when the non-quartz sand filter, the flow rate of 3-10M / H, backwashing strength of 4-12L (S * m). Working pressure: 0.2 --- 0 .6 Mpa, temperature :5 - 60 ºC.
Third stage pretreatment (Resin softener)
Cationic resin used for water softening, primarily to remove hardness of water. The hardness of water is a major calcium (Ca2 +), magnesium (Mg2 +) ion composition, when containing the raw water hardness ions through the resin layer, the water of the Ca2 +, Mg2 + was exchanged resin adsorption, and other objects at the same time the quality of the release of sodium Na + ions flow from the softener in the water is removed from the softened water hardness ions. So as to effectively prevent the reverse osmosis membrane fouling. System can automatically recoil, and so is red.
The main structure: barrel body, baffles, manhole, gauge, filter head, filter, into the water pipes, drains and flushing water mains, as well as access to water, such as the composition of backwashing valve.
Flow rate of the general operation of 15-20M / H, water hardness of 0.03mmol / L the following.
The purpose of washing is to remove the anti-lipid layer of pressure to loose dirt Panniculitis pressure, clear liquid pipe filter, flow rate 5-10M / H, time 10-15 minutes
Ion regeneration: exclusion of water, into the regeneration fluid, cleaning replacement. Renewable liquid salt concentration of 3% - 5%, regenerant consumption 80-100g/mol, resin layer does not flow to the disturbance as the standard, the water hardness is less than 0.5Meq / L.
Wash flow rate is 10-15M / H, 2-10Min.
Working pressure: 0.2 --- 0 .6 Mpa, temperature: 5 - 60 ºC.
Fourth stage pretreatment (Micron filter)
Particle size in water to remove fine particles, sand filters can remove very small colloidal particles in the water, so that the turbidity reached 1 degree, but still per milliliter of water for hundreds of thousands of particle size 1-5 microns colloidal particles, the pressure on this filter to remove water after the particle size of 100 microns or less in small particles, to further reduce the turbidity, to meet the next process of the water requirements of the protection of the next long-running processes.
Model | Production capacity | Dimension(mm) | Weight |
SWT-0.5 | 500L/H | 1080*500*1360 1060*500*1270 | 160Kg |
SWT-1 | 1000L/H | 1340*500*1700 1230*600*2160 | 200Kg |
SWT-2 | 2000L/H | 1300*700*2260 1200*600*1600 | 250Kg |
SWT-3 | 3000L/H | 1400*700*2200 1200*650*1650 | 300Kg |
SWT-4 | 4000L/H | 1600*900*2300 1400*750*1800 | 400Kg |
SWT-5 | 5000L/H | 1800*900*2400 1400*750*1800 | 500Kg |
SWT-6 | 6000L/H | 2000*1000*2500 1600*800*2000 | 600Kg |
SWT-10 | 10000L/H | 2200*1000*2300 2000*1000*2200 | 800Kg |
Address:
Caocun Town Industrial Area, Ruian, Wenzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery, Packaging & Printing
Management System Certification:
ISO 9001
Company Introduction:
Wenzhou Accurate Machinery Manufacturing Co., Ltd was established in 1991 to bridge the demand and supply of purified drinking water treatment equipment, filling machine and packaging machinery. We specialize in the research & development, design, manufacturing, sales, installation, and after-sale service for purified drinking water project, carbonated drink projects and juice projects of global market. We have professional technical team, advanced processing equipments, strict and efficient productive force, in accordance with the development of personified customer service. Our products have won respect of domestic customers and from foreign market as our machines have high quality.
Our products include:
Purified drinking water treatment equipment
Mineral water treatment equipment
Bottled drinking water washing filling capping machine( For PET bottle 500ML, 1L, 1.5L, 2L )
Bottled carbonated drink washing filling capping machine( For PET bottle 500ML, 1L, 1.5L, 2L )
Bottled juice washing filling capping machine( For PET bottle 500ML, 1L, 1.5L, 2L )
5L - 10L washing filling capping machine
5 Gallon washing filling capping machine
All kinds of liquor, red wine filling and packaging machinery
All kinds of liquor, oil, viscosity liquid, sauce filling and packaging machinery
Automatic sleeve labeling machine
Wrapping and shrink packaging machine
Turnkey project for production of bottled drinking water, carbonated drink, and juice and so on
We always adhere to people oriented, customer source, honesty, diligence, a win together situation for the purpose and is willing to cooperate with you.